Trills on clarinet (bug or imposible to play?)

[kvapka]

I have composition with clarinet and i want use trill on note Ab and Bb (A flat and B flat in english) but notion dont play trill. It is posible to play trills on this instrument or it is bug?

If i remove flats, trills are played. But not all, F is too not play trills and i forgot write, it dont work only vib. technique in normale is all right.

[thorrild]

kvapka,

Sometimes the trill sample is not invoked when it should be, but it doesn't always seem to be a consistent, repeatable problem.

The other day, I was working on a clarinet part, and the whole-tone trill wouldn't play. As a stopgap solution, I entered a half-tone trill, and it worked. But today, when I returned to the same spot in that file, I was able to change the trill to whole-tone, and it plays back as intended. Maybe you'll have the same luck...

I created a test file (attached), in which the 3 clarinets I have available (Clarinet, Jazz Clarinet and Bass Clarinet) trill their way from the lowest to the highest sample, and I can find only one problem:

The whole-tone trill on the written low F is not triggered. This is true for all three Clarinet samples. I am submitting it to Brian as a bug through the normal channels.

Best,
Thorrild

[thorrild]

The whole-tone trill on the written low F is not triggered.

I meant the sounding low F, of course...

[thorrild]

No matter how much I correct my posts here, the fact remains that there is nothing wrong with that trill note: I had entered a "sharpened" trill on an F, which is not what I intended. The sample works just fine.

Thanks to Brian Meisner for pointing out my mistake.

Best,
Thorrild

[tubatimberinger]

Do you have any articulations on the notes in question? If you put an accent on a note that is trilled, it will play the accent sample, NOT a trill with an accent. Most of the other samples react this way I have found.

tim