Hi,
I currently use this setup:
Sibelius ---> IAC Drivers ----> Logic Pro X ----> Vienna Ensemble Pro
Sibelius plays through IAC Driver the Logic track, on which VEP instances are open.
Setting the sound set of VEP in Sibelius, all the articulations are sent to the IAC bus and then to Vienna through Logic.
In this way, all audio is handled by the mixer in Logic: Sibelius is just a "player", without VST instances open.
It's possible to replace Sibelius with Notion 4 and getting the same result?
In other words, you can apply the template and the joints of VSL to an external MIDI port?
Notation 4 ---> External MidiPort ---> IAC DRIVER ----> Logic Pro ---> VEP?
Thanks and sorry for my bad english ...
- It is currently Wed Apr 24, 2024 3:34 am • All times are UTC - 5 hours [ DST ]
Attention:
Welcome to the old forum. While it is no longer updated, there is a wealth of information here that you may search and learn from.
To partake in the current forum discussion, please visit https://forums.presonus.com
Notion 4--->Logic--->VSL
10 posts
• Page 1 of 1
Re: Notion 4--->Logic--->VSL
You can, but keep in mind that Notion only has 4 MIDI ports.
Bill Reed
Notion 4, Sibelius 7.5, Finale 2011/14, Overture 4, Cubase 7.5
Win8 x64, 32GB RAM
M-Audio ProFire 2626
Kontakt, VSL VI Pro, VE Pro, EWQL Orch, Choirs and Pianos
Notion 4, Sibelius 7.5, Finale 2011/14, Overture 4, Cubase 7.5
Win8 x64, 32GB RAM
M-Audio ProFire 2626
Kontakt, VSL VI Pro, VE Pro, EWQL Orch, Choirs and Pianos
-
wcreed51 - Posts: 754
- Joined: Wed Oct 07, 2009 10:50 am
- Location: Berkshires, MA USA
Re: Notion 4--->Logic--->VSL
Thanks for the Reply...
But ...if I create a music staff for the external midi I can not set it to the articulations of VSL ...
...if I create a staff for VSL, it automatically opens the "internal" virtual instrument ...
how can I get the joints of VSL on a line set to send midi on external instrument or IAC dirver? ...
Thank you very much!
But ...if I create a music staff for the external midi I can not set it to the articulations of VSL ...
...if I create a staff for VSL, it automatically opens the "internal" virtual instrument ...
how can I get the joints of VSL on a line set to send midi on external instrument or IAC dirver? ...
Thank you very much!
- luigi.di.guida
- Posts: 7
- Joined: Tue Jul 08, 2014 8:11 pm
Re: Notion 4--->Logic--->VSL
QUESTION: Is there a specific reason for having Vienna Ensemble Pro 5 hosted by or connected to Logic Pro X?
QUESTION: Why not connect Vienna Ensemble Pro 5 to NOTION 4; use the VSTi version of Vienna Symphonic Library in NOTION 4; or use one of the predefined templates for Vienna Symphonic Library products, since the latter have custom rules specific to Vienna Symphonic Library products, which maps to being tailored to Vienna Symphonic Library products?
THOUGHTS
If your Mac has sufficient system memory--which I define to be 16GB or greater--then you should be able to use a Vienna Symphonic Library instrument in NOTION 4, which includes being able to use Vienna Ensemble Pro 5 as a streaming server to provide Vienna Symphonic Library instruments to NOTION 4 . . .
Using Vienna Symphonic Library directly in NOTION 4 makes it possible to use the specific predefined NOTION 4 rules for Vienna Symphonic Library . . .
You can use Logic Pro X as the mixer application in a ReWire 2 session where Logic Pro X is the ReWire 2 host controller and NOTION 4 is a ReWire 2 slave. In this scenario, NOTION 4 handles the audio generation in conjunction with the Vienna Symphonic Library products, but Logic Pro X is responsible for handling the audio . . .
I did a few experiments, and one of them verified that NOTION 4 generates MIDI Control Change (CC) Expression messages and sends them via an IAC Driver "virtual MIDI cable" when you are working with a NOTION 4 External MIDI staff that is configured to output to the respective IAC Driver "virtual MIDI cable" . . .
[NOTE: You can view the full image by right-clicking and selecting the view option provided by your web browser, which for FireFox is "Viewk Image" but for Safari is "Open Image in New Tab" or "Open Image in New Window" . . . ]
![Image](http://www.surfwhammys.com/MidiKit-NOTION4-MIDI-Detail.png)
![Image](http://www.surfwhammys.com/MidiSpy-NOTION4-External-MIDI-Articulations.png)
As noted by wcreed51, NOTION 4 has four MIDI ports, but there are 16 channels per MIDI port . . . .
However, as I recall, I think that NOTION 4 only transmits CC messages over Channel 1 of MIDI Port A, which is a bit of a problem in this context . . .
NOTION 4 forgets to switch channels? (Notion Music FORUM)
SUMMARY
I am not certain that I understand what you want to do, and since I do not have Vienna Ensemble Pro 5 or any of the standalone Vienna Symphonic Library products (although I have VSL Legacy via Kontakt 6), I have to do a bit of guessing . . .
Yet, as I read the original post I can make a list of things that can be done with Logic Pro X, NOTION 4, and the various Vienna Symphonic Library products, and each item on the list gets a "This can be done!" check . . .
So, instead of focusing on whether it is possible to do something very specific but perhaps not so typical, it might be helpful to provide a bit of information on what you need to do, because there probably is a way to do what you need to do based on the way NOTION 4, Logic Pro X, and the various Vienna Symphonic Library products work and interact . . .
NOTION 4 works nicely wth Logic Pro X, and they do ReWire 2 correctly . . .
Based on reports from other NOTION 4 users who post to this forum, NOTION 4 works nicely with Vienna Symphonic Library products, including Vienna Ensemble Pro 5 . . .
There are predefined NOTION 4 rules for some of the Vienna Symphonic Library instrument sets, and you can create your own user-defined custom rules . . .
Intuitively, I think there probably is a way to do what you need to do within the framework that NOTION 4, Logic Pro X, and the various Vienna Symphonic Library products provide, which includes MIDI, ReWire 2, and "virtual MIDI cables" . . .
Lots of FUN!![Smile :)](./images/smilies/icon_e_smile.gif)
QUESTION: Why not connect Vienna Ensemble Pro 5 to NOTION 4; use the VSTi version of Vienna Symphonic Library in NOTION 4; or use one of the predefined templates for Vienna Symphonic Library products, since the latter have custom rules specific to Vienna Symphonic Library products, which maps to being tailored to Vienna Symphonic Library products?
THOUGHTS
If your Mac has sufficient system memory--which I define to be 16GB or greater--then you should be able to use a Vienna Symphonic Library instrument in NOTION 4, which includes being able to use Vienna Ensemble Pro 5 as a streaming server to provide Vienna Symphonic Library instruments to NOTION 4 . . .
Using Vienna Symphonic Library directly in NOTION 4 makes it possible to use the specific predefined NOTION 4 rules for Vienna Symphonic Library . . .
You can use Logic Pro X as the mixer application in a ReWire 2 session where Logic Pro X is the ReWire 2 host controller and NOTION 4 is a ReWire 2 slave. In this scenario, NOTION 4 handles the audio generation in conjunction with the Vienna Symphonic Library products, but Logic Pro X is responsible for handling the audio . . .
I did a few experiments, and one of them verified that NOTION 4 generates MIDI Control Change (CC) Expression messages and sends them via an IAC Driver "virtual MIDI cable" when you are working with a NOTION 4 External MIDI staff that is configured to output to the respective IAC Driver "virtual MIDI cable" . . .
[NOTE: You can view the full image by right-clicking and selecting the view option provided by your web browser, which for FireFox is "Viewk Image" but for Safari is "Open Image in New Tab" or "Open Image in New Window" . . . ]
![Image](http://www.surfwhammys.com/MidiKit-NOTION4-MIDI-Detail.png)
![Image](http://www.surfwhammys.com/MidiSpy-NOTION4-External-MIDI-Articulations.png)
As noted by wcreed51, NOTION 4 has four MIDI ports, but there are 16 channels per MIDI port . . . .
However, as I recall, I think that NOTION 4 only transmits CC messages over Channel 1 of MIDI Port A, which is a bit of a problem in this context . . .
NOTION 4 forgets to switch channels? (Notion Music FORUM)
SUMMARY
I am not certain that I understand what you want to do, and since I do not have Vienna Ensemble Pro 5 or any of the standalone Vienna Symphonic Library products (although I have VSL Legacy via Kontakt 6), I have to do a bit of guessing . . .
Yet, as I read the original post I can make a list of things that can be done with Logic Pro X, NOTION 4, and the various Vienna Symphonic Library products, and each item on the list gets a "This can be done!" check . . .
So, instead of focusing on whether it is possible to do something very specific but perhaps not so typical, it might be helpful to provide a bit of information on what you need to do, because there probably is a way to do what you need to do based on the way NOTION 4, Logic Pro X, and the various Vienna Symphonic Library products work and interact . . .
NOTION 4 works nicely wth Logic Pro X, and they do ReWire 2 correctly . . .
Based on reports from other NOTION 4 users who post to this forum, NOTION 4 works nicely with Vienna Symphonic Library products, including Vienna Ensemble Pro 5 . . .
There are predefined NOTION 4 rules for some of the Vienna Symphonic Library instrument sets, and you can create your own user-defined custom rules . . .
Intuitively, I think there probably is a way to do what you need to do within the framework that NOTION 4, Logic Pro X, and the various Vienna Symphonic Library products provide, which includes MIDI, ReWire 2, and "virtual MIDI cables" . . .
Lots of FUN!
![Smile :)](./images/smilies/icon_e_smile.gif)
-
Surfwhammy - Posts: 1137
- Joined: Thu Oct 14, 2010 4:45 am
Re: Notion 4--->Logic--->VSL
Thanks a lot...
using Vst in Logic with other virtual instruments with this method:
https://sites.google.com/site/mfalab/sibelius/how-to-have-sibelius-midi-sent-to-logic
Logic is responsable of all audio instances ance Sibelius is only an "external midi player"...
No latency between VSL played by Sibelius and other Virtual Instruents played By Logic...
Setting up the specific "sound set" for VSL on the external midi out of Sibelius, all works very fine!
But I think this is non possible with Notion...right?...
![Sad :(](./images/smilies/icon_e_sad.gif)
using Vst in Logic with other virtual instruments with this method:
https://sites.google.com/site/mfalab/sibelius/how-to-have-sibelius-midi-sent-to-logic
Logic is responsable of all audio instances ance Sibelius is only an "external midi player"...
No latency between VSL played by Sibelius and other Virtual Instruents played By Logic...
Setting up the specific "sound set" for VSL on the external midi out of Sibelius, all works very fine!
But I think this is non possible with Notion...right?...
![Sad :(](./images/smilies/icon_e_sad.gif)
![Sad :(](./images/smilies/icon_e_sad.gif)
![Sad :(](./images/smilies/icon_e_sad.gif)
- luigi.di.guida
- Posts: 7
- Joined: Tue Jul 08, 2014 8:11 pm
Re: Notion 4--->Logic--->VSL
luigi.di.guida wrote:No latency between VSL played by Sibelius and other Virtual Instruents played By Logic...
Controlling latency is a matter of configuring the audio buffers for NOTION 4 and Logic Pro X correctly and using ReWire 2, where specifically ReWire 2 handles synchronization . . .
If you have AU or VSTi virtual instruments in Logic Pro X (which can include native Logic Pro X virtual instruments), then ReWire 2 will keep them synchronized with what you are doing with NOTION 4 . . .
[NOTE: Logic Pro X can use AU and VSTi virtual instruments, as well as the Logic Pro X native virtual instruments; but NOTION 4 only use VSTi virtual instruments and its own native virtual instruments . . . ]
I think that the Sibelius external MIDI strategy was a "work-around" for Sibelius not being able to do what NOTION 4 does . . .
The difference is that NOTION 4 is designed specifically to do this correctly without needing to use a "work-around" or alternative method . . .
To use all the detailed articulations, dynamics, playing styles, and so forth that one can specify with music notation, you need to host the VSTi virtual instruments in NOTION 4, and there are templates that use sets of tailored custom notation rules for Vienna Symphonic Library in NOTION 4 . . .
THOUGHTS
It is like having a bicycle that only works when you ride it backward, which is Sibelius. You get it working, and everything is good. Then you get a different bicycle that works when you ride it forward, which is NOTION 4. Instead of asking "How do I ride it backward?", you want to ask "How do I ride it forward?" . . .
You get to the same place, but with one bicycle you have to ride backward, while with the other bicycle you can ride forward . . .
[NOTE: This YouTube video shows NOTION 4 External MIDI playing a VSTi virtual instrument hosted by Logic Pro X in a ReWire 2 session, and it includes showing how to change the velocity of the MIDI once it is recorded in Logic Pro X . . . ]
LPX N4 K5 ReWire2 Velocity ~ YouTube video
[NOTE: This YouTube video shows Logic Pro X as the ReWire 2 host controller and both NOTION 4 and Reason 7 as ReWire 2 slaves. Everything is synchronized, since this is one of the things that ReWire 2 does. NOTION 4 is playing VSTi virtual instruments that it hosts, but it also is playing two of the Reason 7 synthesizers (the two with solid red track label backgrounds) via music notation on NOTION 4 External MIDI staves, where the MIDI is sent to Reason 7 via a "virtual MIDI cable" . . . ]
"Faster" (Techno Squirrels) ~ Surfwhammy Mix ~ Disk Activity
Lots of FUN!
![Smile :)](./images/smilies/icon_e_smile.gif)
-
Surfwhammy - Posts: 1137
- Joined: Thu Oct 14, 2010 4:45 am
Re: Notion 4--->Logic--->VSL
Uhm ...
Thanks for the reply, but I'm not completely agree with what you say ...
Sibelius works really well with VSL and especially with ENSAMBLE PRO: it has the sound set that actually work very well ....
Maybe you've never used Sibelius+VSL it and then say that Notion 4 does it better ...
Although I have set differently, Sibelius works perfectly with VSL in the same mode of Notion 4.
Rather Notion 4 has serious problems with Vienna Ensemble PRO: please read here:
viewtopic.php?f=2&t=6350
viewtopic.php?f=2&t=5974
I think that Notion is a great software and is the future: it will be a good "bicycle" but now maybe there are some bikes more expensive but better-equipped ...
However I'l follow Notion 4 with great attention!
Greetings!!![Wink ;)](./images/smilies/icon_e_wink.gif)
Thanks for the reply, but I'm not completely agree with what you say ...
Sibelius works really well with VSL and especially with ENSAMBLE PRO: it has the sound set that actually work very well ....
Maybe you've never used Sibelius+VSL it and then say that Notion 4 does it better ...
Although I have set differently, Sibelius works perfectly with VSL in the same mode of Notion 4.
Rather Notion 4 has serious problems with Vienna Ensemble PRO: please read here:
viewtopic.php?f=2&t=6350
viewtopic.php?f=2&t=5974
I think that Notion is a great software and is the future: it will be a good "bicycle" but now maybe there are some bikes more expensive but better-equipped ...
However I'l follow Notion 4 with great attention!
Greetings!!
![Wink ;)](./images/smilies/icon_e_wink.gif)
- luigi.di.guida
- Posts: 7
- Joined: Tue Jul 08, 2014 8:11 pm
Re: Notion 4--->Logic--->VSL
luigi.di.guida wrote: I'm not completely agree with what you say ...
Let's start over . . .
luigi.di.guida wrote:I currently use this setup:
Sibelius ---> IAC Drivers ----> Logic Pro X ----> Vienna Ensemble Pro
Sibelius plays through IAC Driver the Logic track, on which VEP instances are open.
Setting the sound set of VEP in Sibelius, all the articulations are sent to the IAC bus and then to Vienna through Logic.
In this way, all audio is handled by the mixer in Logic: Sibelius is just a "player", without VST instances open.
This can be done with NOTION 4 in a ReWire 2 session, where Logic Pro X is the ReWire 2 host controller and NOTION 4 is a ReWire 2 slave. If you start Logic Pro X first, then it is done in a ReWire 2 session, but if you start NOTION 4 first, it is not done in a ReWire 2 session. The advantage of doing it in a ReWire 2 session is that ReWire 2 coordinates the transports and keeps everything synchronized . . .
The concern I have regards "all the articulations are sent to the IAC bus" and the way "articulations" is defined . . .
The key bit of information is that a NOTION 4 External MIDI staff does not know it is connected to VSL, MachFive 3, Reason 7.1, Addictive Drums, Logic Pro X native instruments, or anything else in a very specific way; so it follows generic rules rather than rules tailored to the specific sampled sound library and rendering engine . . .
[NOTE: This is the set of articulations supported by generic rules: {dash, staccato, staccatissimo, mezz-staccato, accent, legato-accent, staccato-accent, staccatissimo-accent, strong-accent, legato-strong-accent, staccato-strong-accent, staccatissimo-string-accent, soft-start}, which is fine, except that other than a bit of information about velocity, this is all that is supported by generic rules. There are no keyswitches or anything else that refers to playing styles (a.k.a., "techniques") or anything else, so it is only a limited subset of everything that the Vienna Symphonic Library products provide . . . ]
In the same scenario, it appears from what you wrote that Sibelius somehow knows it is sending MIDI to play VSL/VEP, although perhaps not . . .
Regardless, it apparently works nicely in the scenario you described ("Sibelius ---> IAC Drivers ----> Logic Pro X ----> Vienna Ensemble Pro"), which is great!
luigi.di.guida wrote:It's possible to replace Sibelius with Notion 4 and getting the same result?
In other words, you can apply the template and the joints of VSL to an external MIDI port?
Notation 4 ---> External MidiPort ---> IAC DRIVER ----> Logic Pro ---> VEP?
This might be possible, but since I do not have VSL/VEP, other than the VSL Legacy samples that come with Kontakt 5, I have no way to do experiments to determine whether this is possible . . .
There is no predefined NOTION 4 template for doing this, but there might be a way to do it . . .
The key bit of information is that tailoring everything (articulations, dynamics, playing styles, and so forth) to a specific sampled sound library and rendering engine is done in NOTION 4 using a mapping which includes a set of rules; and there are a few predefined mappings that are provided with NOTION 4 and have more intimate interactions with NOTION 4 . . .
Specifically, there are four mappings for Vienna Symphonic Library products, as shown in the following screen capture . . .
![Image](http://www.surfwhammys.com/N4-Predefined-Mappings-Templates-Rules.png)
There is more information provided with NOTION 4, and one set of information is provided as "PluginData", which includes a specific set of tailored rules, which by convention are stored in rules files ("*.prules"), where the following images are partial screen captures provided to help get a sense of the types of information . . .
![Image](http://www.surfwhammys.com/N4-Resources-PluginData-VSLPRO-v1.png)
![Image](http://www.surfwhammys.com/N4-VSL-EnsemblePRO-prules.png)
THOUGHTS
I am not suggesting that one bicycle is better than another . . .
Instead, I suggest (a) that there are different ways to ride bicycles and (b) that the best way to ride the NOTION 4 bicycle probably is different from the best way to ride the Sibelius bicycle . . .
If you want to have all the detailed mappings of articulations, dynamics, playing styles (a.k.a., "techniques"), and so forth tailored specifically to one of the four supported flavors of Vienna Symphonic Library products, then the recommended strategy is to use the respective predefined NOTION 4 template, which in turn maps to hosting the Vienna Symphonic Library product in NOTION 4 or connecting to it directly, as the case might be . . .
However, it is possible to create user-defined custom rules; and it might be possible to use a user-defined custom rules file with a NOTION 4 External MIDI staff, but at present all I can do is guess, since I have not experimented with this . . .
Nevertheless, I did some different experiments and verified that a NOTION 4 External MIDI staff recognizes and correctly transmits certain types of articulations, where one example is staccato . . .
If you do not need to be able to do all the elaborate activities, then NOTION 4 certainly can send MIDI to Logic Pro X based on music notation provided on a NOTION 4 External MIDI staff, and you have as many as 64 channels to do this, but with the caveat that certain types of MIDI information only is transmitted on Channel 1 of MIDI Port A, which is a bit of a problem, really . . .
When you are doing everything in 64-bit mode on a computer that has at least 16GB of system memory, then you can host Vienna Symphonic Library products in NOTION 4 and for the products NOTION 4 supports with special templates, rules, and so forth, you get the full range of articulations, dynamics, playing styles, and so forth . . .
So long as you have the audio buffers configured correctly and consistently for NOTION 4, Logic Pro X, and the various rendering engines, ReWire 2 will handle the synchronization, since this is one of the roles of ReWire 2 . . .
Depending upon one's perspective, people in Australia and England drive on the "wrong" side of the road, so if you need to drive in those countries, then you need to learn how to drive on the "wrong" side of the road. Of course, in the US, everyone tends to drive on the "right" side of the road, which as best as I have been able to determine is the reason that there are no "roundabouts" anywhere other than in Massachusetts, which we know is a state where there continue to be British loyalists, disturbing as it might be . . .
![Razz :P](./images/smilies/icon_razz.gif)
Lots of FUN!
![Smile :)](./images/smilies/icon_e_smile.gif)
-
Surfwhammy - Posts: 1137
- Joined: Thu Oct 14, 2010 4:45 am
Re: Notion 4--->Logic--->VSL
Ok Thanks a lot!
The last question: I promise! (excuse me: I like to work with Notion and I'm trying to figure out how to do better)![Smile :)](./images/smilies/icon_e_smile.gif)
could you tell me how do you assign the "Custom Rules" to an external MIDI port?
Thank you!
The last question: I promise! (excuse me: I like to work with Notion and I'm trying to figure out how to do better)
![Smile :)](./images/smilies/icon_e_smile.gif)
could you tell me how do you assign the "Custom Rules" to an external MIDI port?
Thank you!
- luigi.di.guida
- Posts: 7
- Joined: Tue Jul 08, 2014 8:11 pm
Re: Notion 4--->Logic--->VSL
luigi.di.guida wrote:Ok Thanks a lot!
The last question: I promise! (excuse me: I like to work with Notion and I'm trying to figure out how to do better)
could you tell me how do you assign the "Custom Rules" to an external MIDI port?
Thank you!
There are other folks who know a lot more about custom rules that I do, but based on what I understand, you can put a custom rules file in the same folder as a NOTION 4 score, and NOTION 4 will use those custom rules . . .
Whether it uses the custom rules with a NOTION 4 External MIDI staff is another matter--and at present I do not know--but there clearly are generic rules in the NOTION 4 application package, and my experiments indicate that NOTION 4 applies articulations for NOTON 4 External MIDI staves according to generic rules, so I think this is what will happen . . .
[NOTE: In the experiments I performed, there only were NOTION 4 External MIDI staves, so there was nothing to indicate to NOTION that it should use anything other than generic rules. There is a "Generic" folder in the NOTION 4 application package on the Mac, and it has a "Rules" subfolder which contains the file "Generic.prules" (see below), and it has the information I referenced generally in my previous post--only a handful of simple articulations, specifically the subset {dash, staccato, staccatissimo, mezz-staccato, accent, legato-accent, staccato-accent, staccatissimo-accent, strong-accent, legato-strong-accent, staccato-strong-accent, staccatissimo-string-accent, soft-start} . . . ]
![Image](http://www.surfwhammys.com/N4-Mac-App-Package-Resources-PluginData-Generic-Rules.png)
There are at least three primary considerations:
(1) Custom rules tend to apply to everything, but there are ways to make them more specific . . .
(2) You need to understand a basic set of XML language constructs, and you need to understand the way custom rules work . . .
(3) At present, some MIDI messages only are transmitted on MIDI Port A and Channel 1, where as best as I recall this applies to Control Change (CC) MIDI messages . . .
[NOTE: There is more detailed information on the Channel 1 limitation in the following thread, and it appears to apply only to specific scenarios . . . ]
NOTION 4 forgets to switch channels? (Notion Music FORUM)
This link to the Notion Music website has information on NOTION 4 custom rules:
Notion Music:->Support:->Downloads (Notion Music)
![Image](http://www.surfwhammys.com/Notion-Music-Website-Support-Menu.png)
[NOTE: When you get to the "Downloads" page, click on the "OTHER" tab, which is where you will find the information on custom rules . . . ]
![Image](http://www.surfwhammys.com/N4-Downloads-Other-Tab.png)
Lots of FUN!
![Smile :)](./images/smilies/icon_e_smile.gif)
-
Surfwhammy - Posts: 1137
- Joined: Thu Oct 14, 2010 4:45 am
10 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 43 guests