Gentlemen,
IK allowed me to download Symphony Strings 2 from Sonic Reality for free.
There are some amusing sounds in it, but running it requires to lay down some rules for it.
Is anyone aware of SampleTank plugin ID (I'm still a N3 user)?
Thank you
- It is currently Sat Apr 27, 2024 12:40 pm • All times are UTC - 5 hours [ DST ]
Attention:
Welcome to the old forum. While it is no longer updated, there is a wealth of information here that you may search and learn from.
To partake in the current forum discussion, please visit https://forums.presonus.com
Plugin ID for IK Sample Tank to run Symphony Strings 2
8 posts
• Page 1 of 1
Plugin ID for IK Sample Tank to run Symphony Strings 2
Fabio
Arrigo Beyle - Milanese - Lived, wrote, loved - - Stendhal
Being italian is a full-time job - - B. Severgnini
Arrigo Beyle - Milanese - Lived, wrote, loved - - Stendhal
Being italian is a full-time job - - B. Severgnini
-
fabiolcati - Posts: 441
- Joined: Mon Sep 21, 2009 9:08 am
- Location: Milan - Italy
Re: Plugin ID for IK Sample Tank to run Symphony Strings 2
You can determine the plugin ID of any VST by opening a staff in Notion with that VST plugin assigned to it, then press "Shift-I". The first four characters in the parentheses listed after the VST name is the unique VST ID. In Notion 4, you can just use this four character identifier as your Plugin ID in your plugin rules, but I'm not sure if you can do that in Notion 3, I never tried.
If that four-character doesn't work as the Plugin ID, you can convert it to the numeric equivalent. I don't have SampleTank readily available to open in Notion (I only use 64-bit Notion and haven't jBridged it yet), so I can't figure that one out directly for you. But let's use another one as an example you can follow to find it yourself.
I'll use Miroslav Philharmonik as an example. The VST ID for PC is revealed by Shift-I to be "PH10". First we have to convert each character to its ASCII equivalent, but in hexadecimal: 50-48-31-30. You can look up ASCII codes in hexadecimal here: http://www.ascii.cl/htmlcodes.htm
Then, we treat those four HEX codes as one large 8-character HEX code, and convert to a decimal number (which is the Plugin ID that Notion needs in the custom rules file). I just used a programming calculator, entered 50483130 as an 8-diugit hex number, and told it to convert to decimal. The result was 1346908464. I know that is correct, because that is what Notion themselves used for Miroslav as the Plugin ID in their ruleset.
So, if you follow this procedure for your SampleTank plugin, you should be able to derive the numeric Plugin ID. Or, just let me know four character ID comes up using Shift-I and I can do the conversion.
If that four-character doesn't work as the Plugin ID, you can convert it to the numeric equivalent. I don't have SampleTank readily available to open in Notion (I only use 64-bit Notion and haven't jBridged it yet), so I can't figure that one out directly for you. But let's use another one as an example you can follow to find it yourself.
I'll use Miroslav Philharmonik as an example. The VST ID for PC is revealed by Shift-I to be "PH10". First we have to convert each character to its ASCII equivalent, but in hexadecimal: 50-48-31-30. You can look up ASCII codes in hexadecimal here: http://www.ascii.cl/htmlcodes.htm
Then, we treat those four HEX codes as one large 8-character HEX code, and convert to a decimal number (which is the Plugin ID that Notion needs in the custom rules file). I just used a programming calculator, entered 50483130 as an 8-diugit hex number, and told it to convert to decimal. The result was 1346908464. I know that is correct, because that is what Notion themselves used for Miroslav as the Plugin ID in their ruleset.
So, if you follow this procedure for your SampleTank plugin, you should be able to derive the numeric Plugin ID. Or, just let me know four character ID comes up using Shift-I and I can do the conversion.
- dcd111
- Posts: 73
- Joined: Wed Jun 06, 2012 6:07 pm
Re: Plugin ID for IK Sample Tank to run Symphony Strings 2
Thank you dcd.
The shift-I operation returned "12TS".
Can you help me with the conversion?
Thank you again
The shift-I operation returned "12TS".
Can you help me with the conversion?
Thank you again
Fabio
Arrigo Beyle - Milanese - Lived, wrote, loved - - Stendhal
Being italian is a full-time job - - B. Severgnini
Arrigo Beyle - Milanese - Lived, wrote, loved - - Stendhal
Being italian is a full-time job - - B. Severgnini
-
fabiolcati - Posts: 441
- Joined: Mon Sep 21, 2009 9:08 am
- Location: Milan - Italy
Re: Plugin ID for IK Sample Tank to run Symphony Strings 2
Try 825381971 as the Plugin ID, that should work.
- dcd111
- Posts: 73
- Joined: Wed Jun 06, 2012 6:07 pm
Re: Plugin ID for IK Sample Tank to run Symphony Strings 2
thanks.
I'll keep you posted
I'll keep you posted
Fabio
Arrigo Beyle - Milanese - Lived, wrote, loved - - Stendhal
Being italian is a full-time job - - B. Severgnini
Arrigo Beyle - Milanese - Lived, wrote, loved - - Stendhal
Being italian is a full-time job - - B. Severgnini
-
fabiolcati - Posts: 441
- Joined: Mon Sep 21, 2009 9:08 am
- Location: Milan - Italy
Re: Plugin ID for IK Sample Tank to run Symphony Strings 2
Why not just use group based rules?
Bill Reed
Notion 4, Sibelius 7.5, Finale 2011/14, Overture 4, Cubase 7.5
Win8 x64, 32GB RAM
M-Audio ProFire 2626
Kontakt, VSL VI Pro, VE Pro, EWQL Orch, Choirs and Pianos
Notion 4, Sibelius 7.5, Finale 2011/14, Overture 4, Cubase 7.5
Win8 x64, 32GB RAM
M-Audio ProFire 2626
Kontakt, VSL VI Pro, VE Pro, EWQL Orch, Choirs and Pianos
-
wcreed51 - Posts: 754
- Joined: Wed Oct 07, 2009 10:50 am
- Location: Berkshires, MA USA
Re: Plugin ID for IK Sample Tank to run Symphony Strings 2
wcreed51 wrote:Why not just use group based rules?
Because I'm running Notion3 ( )
Fabio
Arrigo Beyle - Milanese - Lived, wrote, loved - - Stendhal
Being italian is a full-time job - - B. Severgnini
Arrigo Beyle - Milanese - Lived, wrote, loved - - Stendhal
Being italian is a full-time job - - B. Severgnini
-
fabiolcati - Posts: 441
- Joined: Mon Sep 21, 2009 9:08 am
- Location: Milan - Italy
Re: Plugin ID for IK Sample Tank to run Symphony Strings 2
Mi dispiace!
Bill Reed
Notion 4, Sibelius 7.5, Finale 2011/14, Overture 4, Cubase 7.5
Win8 x64, 32GB RAM
M-Audio ProFire 2626
Kontakt, VSL VI Pro, VE Pro, EWQL Orch, Choirs and Pianos
Notion 4, Sibelius 7.5, Finale 2011/14, Overture 4, Cubase 7.5
Win8 x64, 32GB RAM
M-Audio ProFire 2626
Kontakt, VSL VI Pro, VE Pro, EWQL Orch, Choirs and Pianos
-
wcreed51 - Posts: 754
- Joined: Wed Oct 07, 2009 10:50 am
- Location: Berkshires, MA USA
8 posts
• Page 1 of 1
Return to Custom Rules Discussion
Who is online
Users browsing this forum: No registered users and 4 guests