This afternoon when starting N3 I got the update warning and installed version 3.1.256.
What does it solve?
Raymond
- It is currently Wed Apr 30, 2025 12:31 pm • All times are UTC - 5 hours [ DST ]
Attention:
Welcome to the old forum. While it is no longer updated, there is a wealth of information here that you may search and learn from.
To partake in the current forum discussion, please visit https://forums.presonus.com
Update to 3.1.256?
4 posts
• Page 1 of 1
Update to 3.1.256?
by Raymond Robijns » Thu Apr 08, 2010 2:27 pm
PC Intel I7-Quad core, 12 Gb RAM, Windows 7-Pro X64, lots of HD's intern and extern, SONAR 8.5, NOTION 3, Altiverb, Overture, GPO libr., Garritan Authorized Steinway, PianoTeq 3.5 and soon EWQL SO.
- Raymond Robijns
- Posts: 87
- Joined: Thu Mar 11, 2010 5:41 pm
- Location: The Hague, The Netherlands
Re: Update to 3.1.256?
by astinov » Thu Apr 08, 2010 4:53 pm
Hi Raymond,
Yes, 256 was primarily a fix for an issue on Windows were if you had your DPI settings larger than 100%, the interface was not scaling right. It also fixes some issues with pre-bends and mandolin tremolo playback.
Hope this helps
Lubo Astinov
Yes, 256 was primarily a fix for an issue on Windows were if you had your DPI settings larger than 100%, the interface was not scaling right. It also fixes some issues with pre-bends and mandolin tremolo playback.
Hope this helps
Lubo Astinov
- astinov
- Posts: 264
- Joined: Tue Jun 09, 2009 1:40 pm
Re: Update to 3.1.256?
by Raymond Robijns » Thu Apr 08, 2010 5:51 pm
It helped, but I had no problems with the display.....
Raymond
Raymond
PC Intel I7-Quad core, 12 Gb RAM, Windows 7-Pro X64, lots of HD's intern and extern, SONAR 8.5, NOTION 3, Altiverb, Overture, GPO libr., Garritan Authorized Steinway, PianoTeq 3.5 and soon EWQL SO.
- Raymond Robijns
- Posts: 87
- Joined: Thu Mar 11, 2010 5:41 pm
- Location: The Hague, The Netherlands
Re: Update to 3.1.256?
by frhornplayer » Mon Apr 12, 2010 4:33 am
Hello Lubo,
I thought I should bring this up. Ever since the 3.1.256 update there is a strange thing happening with brass mutes. I notice that if I add any kind of an accent to a note while a brass instrument has a straight mute applied, the sound will change to an unmuted sample during playback. This didn't happen with previous builds. Just thought I would bring that issue up.
Thanks,
Mark Lorentzen
I thought I should bring this up. Ever since the 3.1.256 update there is a strange thing happening with brass mutes. I notice that if I add any kind of an accent to a note while a brass instrument has a straight mute applied, the sound will change to an unmuted sample during playback. This didn't happen with previous builds. Just thought I would bring that issue up.
Thanks,
Mark Lorentzen
- frhornplayer
- Posts: 11
- Joined: Wed Jun 03, 2009 9:17 pm
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 51 guests