Attention:

Welcome to the old forum. While it is no longer updated, there is a wealth of information here that you may search and learn from.

To partake in the current forum discussion, please visit https://forums.presonus.com

Manual CC Entry in Sequencer Staff?

A Forum to Discuss NOTION

Manual CC Entry in Sequencer Staff?

Postby DrH » Sat Nov 14, 2009 6:17 pm

Is there a way that I can manually enter a CC number and value on a sequencer staff?

If so, will N3 chase those CC entries?

Thnx!

DrH
DrH
 
Posts: 110
Joined: Wed Aug 12, 2009 4:56 pm

Re: Manual CC Entry in Sequencer Staff?

Postby Novatlan » Sun Nov 15, 2009 2:29 am

Yep, this is described in one of the excellect tutorials over at YouTube:
http://www.youtube.com/user/NOTIONMusic ... BN3fe3y3Go
Here Lubu uses the Sequencer Stall to enter Modwheel data, but you can use any CC you like.
Do not care for critics. Noone ever raised a statue to a critic (Jean Sibelius)
Riding is like nuts and bolts: If the rider's nuts, the horse bolts (Nicholas Evans)
www.demo.novatlan-sound.de
User avatar
Novatlan
 
Posts: 224
Joined: Thu Sep 24, 2009 8:35 am
Location: Bingen, Germany

Re: Manual CC Entry in Sequencer Staff?

Postby DrH » Sun Nov 15, 2009 2:43 pm

I watched that tutorial of him entering ModWheel data, and he had do so going into record mode.

What I am wondering is if there is a way to enter CC data (especially a CC# that is not not transmitted by MIDI keyboard) *manually*; i.e. without having to record it.

For example: "At this beat, insert a CC#3 with a value of 2".

Why would I want to do this? Because I use Kontakt 3.5 vst and have scripts I have written that I trigger via normally unused CCs.

Thanks for your response,

DrH
DrH
 
Posts: 110
Joined: Wed Aug 12, 2009 4:56 pm

Re: Manual CC Entry in Sequencer Staff?

Postby Novatlan » Sun Nov 15, 2009 4:19 pm

That's actually a pretty good question...
I hope someone from Notion can enlighten us here, because I don't know either^^

If this is not possible, I hereby declare this a feature request :)
Do not care for critics. Noone ever raised a statue to a critic (Jean Sibelius)
Riding is like nuts and bolts: If the rider's nuts, the horse bolts (Nicholas Evans)
www.demo.novatlan-sound.de
User avatar
Novatlan
 
Posts: 224
Joined: Thu Sep 24, 2009 8:35 am
Location: Bingen, Germany

Re: Manual CC Entry in Sequencer Staff?

Postby mikhail » Mon Nov 16, 2009 5:45 am

Hi,

In my opinion, this could be part of a larger ensemble : the ability to switch back and forth between notation staff and sequencer staff. Currently you can only convert a sequencer staf into a notation staff.

Since notated articulations actually trigger MIDI events, it is a way of writing MIDI events in step time. If we were given the ability to convert a notation staff into a sequencer staff, it would be quite natural to extend the step time input to any kind of controller event. That could also be quite useful to fine tune note length and position to get the best out of our orchestral libraries.

My 2 cents,
Michaël
mikhail
 
Posts: 7
Joined: Tue Oct 27, 2009 8:15 am

Re: Manual CC Entry in Sequencer Staff?

Postby fabiolcati » Mon Nov 16, 2009 6:22 am

mikhail wrote:My 2 cents


Mine too.

Hope soon rising a dollar.

:D
Fabio
Arrigo Beyle - Milanese - Lived, wrote, loved - - Stendhal
Being italian is a full-time job - - B. Severgnini
User avatar
fabiolcati
 
Posts: 441
Joined: Mon Sep 21, 2009 9:08 am
Location: Milan - Italy

Re: Manual CC Entry in Sequencer Staff?

Postby mikhail » Mon Nov 16, 2009 12:38 pm

fabiolcati wrote:
mikhail wrote:My 2 cents


Mine too.

Hope soon rising a dollar.

:D


hihi ! :lol:
mikhail
 
Posts: 7
Joined: Tue Oct 27, 2009 8:15 am

Re: Manual CC Entry in Sequencer Staff?

Postby DrH » Mon Nov 16, 2009 12:55 pm

Mikhail,

Good points, but remember that the whole problem is that there are *many* CCs that cannot be triggered from a MIDI keyboard, so they would not be able to be recorded in Step Time either, which is why we would need a manual, dialog-box approach to CC entry.

DrH
DrH
 
Posts: 110
Joined: Wed Aug 12, 2009 4:56 pm

Re: Manual CC Entry in Sequencer Staff?

Postby wcreed51 » Mon Nov 30, 2009 3:39 pm

Why no response for Lubo or Kyle on this? Before N3 was released, Kyle told me on the NS foum that this would be no problem. How do we do it? It's crucial for anyone using other VST sample sets.
Bill Reed
Notion 4, Sibelius 7.5, Finale 2011/14, Overture 4, Cubase 7.5
Win8 x64, 32GB RAM
M-Audio ProFire 2626
Kontakt, VSL VI Pro, VE Pro, EWQL Orch, Choirs and Pianos
User avatar
wcreed51
 
Posts: 754
Joined: Wed Oct 07, 2009 10:50 am
Location: Berkshires, MA USA

Re: Manual CC Entry in Sequencer Staff?

Postby wcreed51 » Fri Dec 11, 2009 3:11 pm

Bump...
Bill Reed
Notion 4, Sibelius 7.5, Finale 2011/14, Overture 4, Cubase 7.5
Win8 x64, 32GB RAM
M-Audio ProFire 2626
Kontakt, VSL VI Pro, VE Pro, EWQL Orch, Choirs and Pianos
User avatar
wcreed51
 
Posts: 754
Joined: Wed Oct 07, 2009 10:50 am
Location: Berkshires, MA USA

Next

Return to NOTION

Who is online

Users browsing this forum: erasadowu and 27 guests