Attention:

Welcome to the old forum. While it is no longer updated, there is a wealth of information here that you may search and learn from.

To partake in the current forum discussion, please visit https://forums.presonus.com

EWQLSO

A Forum to Discuss NOTION

EWQLSO

Postby francois_harel » Sun Oct 04, 2009 9:06 pm

Dear all,
I just bought Notion 3.
I usually use Finale 2010 with EWQLSO Plat+.
I think that Notion3can handle EWQLSO.
Is it ok with PLAY edition ?
Is Notion automatically fire the right articulation ? If yes, I probably should use aster instruments ... is it right ?

Is the mixer can control which mic I use on PLAY ?
We usually use Master 18 Vlns for Violins 1 section and Master 11 Violins for the Violins II section.
But, as the Master 11 Vln doesn't provide pizz articulation, how Notion handle that ?

Francois, Montreal
QX9650 3.0 GHz on Asus Maximus Formula, 8Gbytes, 4 SATA2 drives on Vista x64.
Finale 2011b, Sonar PE 8.5.2, KP2, K3 and K4, fullGPO, JABB, CoMB
EWQLSO Silver and Plat+ on PLAY 2.0.25
Edirol UA-1000, M-Audio Keystation Pro 88
francois_harel
 
Posts: 22
Joined: Sun Oct 04, 2009 9:00 pm
Location: Montreal, Canada

Re: EWQLSO

Postby astinov » Mon Oct 05, 2009 1:49 pm

Hi Francois,

Congratulations on your new software. NOTION3 provides you with VSTi presets designed for the PLAY edition of EWQL Symphonic Orchestra Platinum (Plus) set. You can also choose to use PLAY like you would in any other VST host and setup custom instruments yourself.

The presets are custom-made, they take care of almost all available articulation and techniques that you can place in the score and will playback your pizz samples, yes. The first Violins are mostly the 18v patches with 11v patches filling in where articulations are missing (legno, trills, etc...).

The NOTION3 mixer can route any available audio out from any VSTi or a ReWire device to an Aux channel and thus control whatever is being received.

I hope that was helpful :) Welcome to NOTION3

Lubo Astinov
astinov
 
Posts: 264
Joined: Tue Jun 09, 2009 1:40 pm

Re: EWQLSO

Postby dcoscina » Mon Oct 05, 2009 4:03 pm

Lubo one question- to load an entire orchestra template using Platinum Plus is quite memory hungry- I have 8 gb of RAM but I sense that Notion3 cannot access all that RAM due to the 32 bit 3 gb memory limit. Any suggestions as to get around this?

Dave- loving N3 nonetheless.
dcoscina
 
Posts: 35
Joined: Fri Jun 19, 2009 5:52 pm

Re: EWQLSO

Postby francois_harel » Mon Oct 05, 2009 5:22 pm

Dear Mr. Astinov,

Is N3 is heavy on the cpu ?
I run a quad-core at 3GHz with 8Gbytes of ram.
Is it ok for full score?
As I run on Vista x64, N3 seems to be compatible on this OS and I have PLAY x64, do you think that I will can handle all my 8Gbytes of memory?

Also, does N3 has a entry mode like Speedy in Finale ?

Regards,
Francois, Montreal
QX9650 3.0 GHz on Asus Maximus Formula, 8Gbytes, 4 SATA2 drives on Vista x64.
Finale 2011b, Sonar PE 8.5.2, KP2, K3 and K4, fullGPO, JABB, CoMB
EWQLSO Silver and Plat+ on PLAY 2.0.25
Edirol UA-1000, M-Audio Keystation Pro 88
francois_harel
 
Posts: 22
Joined: Sun Oct 04, 2009 9:00 pm
Location: Montreal, Canada


Return to NOTION

Who is online

Users browsing this forum: No registered users and 74 guests