Attention:

Welcome to the old forum. While it is no longer updated, there is a wealth of information here that you may search and learn from.

To partake in the current forum discussion, please visit https://forums.presonus.com

Cannot get instruments to make a sound !

A Forum to Discuss NOTION

Cannot get instruments to make a sound !

Postby mrmark » Thu Dec 02, 2010 12:13 pm

I started this process in another forum "N3 does not seem to do the right nuances." However it is getting away from the original topic, hence the new topic.

I am using Notion SLE with Philharmonik and for whatever reason some of the playback of the double bass cuts in and out or doesn't make a sound at all. Pizz or some tied notes.

Admin suggested I reload the sounds.

I have tried to reload the sounds. The pathway is different for SLE than Notion 3 and have yet not been able to reload the instrument sounds.

I am using a MAC running OSX 10.6.5 Snow leopard

The pathway thus far is Macintosh HD\Library\Application Support\ IK media philharmonik...
instruments ? now it asks me to pick from these.

Any help would be greatly appreciated.
Attachments
Screen shot 2010-12-02 at 10.10.59 AM.png
Screen shot 2010-12-02 at 10.10.59 AM.png (348.66 KiB) Viewed 4425 times
Last edited by mrmark on Thu Dec 02, 2010 2:30 pm, edited 1 time in total.
Thank you very much,
Mark aka Mr Mark !
www.mrmark.ca
User avatar
mrmark
 
Posts: 10
Joined: Mon Nov 29, 2010 9:57 am
Location: winnipeg Mb, Canada

Re: Cannot get instruments to make a sound !

Postby DaddyO » Thu Dec 02, 2010 2:17 pm

Are your notes within the instrument's range?
________________
SacredSymphonics
DaddyO
 
Posts: 91
Joined: Fri Nov 19, 2010 12:44 pm

Re: Cannot get instruments to make a sound !

Postby mrmark » Thu Dec 02, 2010 2:29 pm

Thanks DaddyO.

Yes they are in range, and as a matter of fact the section works on a previous version of my piece ! https://files.me.com/singamajig/m7lgfo.mp3

I am glad I save all revisions.

In my botched copy, the meters say there is sound going to the mixer, but not that I can hear. Maybe it has do with dynamics I edited or note values i have edited.

I hope this is just a brain fart on my part. Maybe I am editing incorrectly.
Thank you very much,
Mark aka Mr Mark !
www.mrmark.ca
User avatar
mrmark
 
Posts: 10
Joined: Mon Nov 29, 2010 9:57 am
Location: winnipeg Mb, Canada

Re: Cannot get instruments to make a sound !

Postby Admin » Thu Dec 02, 2010 4:03 pm

mrmark wrote:Thanks DaddyO.

Yes they are in range, and as a matter of fact the section works on a previous version of my piece ! https://files.me.com/singamajig/m7lgfo.mp3

I am glad I save all revisions.

In my botched copy, the meters say there is sound going to the mixer, but not that I can hear. Maybe it has do with dynamics I edited or note values i have edited.

I hope this is just a brain fart on my part. Maybe I am editing incorrectly.



As I said earlier....when using SLE you need to select the path for locating your samples in the Miroslav interface......NOT the NOTIONSLE interface.

Pull up the VST interface, select "pref" (bottom right side of the interface), locate your "instruments" folder and select.

This should do the trick.
User avatar
Admin
Site Admin
 
Posts: 1006
Joined: Mon May 11, 2009 7:12 pm

Re: Cannot get instruments to make a sound !

Postby mrmark » Thu Dec 02, 2010 10:13 pm

That was the kind of brain fart I was talking about.
I will give it a try. Thanks for your help in this matter.
Thank you very much,
Mark aka Mr Mark !
www.mrmark.ca
User avatar
mrmark
 
Posts: 10
Joined: Mon Nov 29, 2010 9:57 am
Location: winnipeg Mb, Canada


Return to NOTION

Who is online

Users browsing this forum: orojuuwan and 6 guests